josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:41:07 GMT -5
Here it is, ready for the top to be glued on.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:43:30 GMT -5
I didn't have the right tools or a lot of bar clamps to easily make the skin for the top the way the instructions say, so I just added each piece one at a time. Painstakingly. But at least I know that each strip is glued firmly to the frame.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:44:04 GMT -5
The top is almost ready!
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:45:46 GMT -5
I planed the rails and the top smooth, and sanded to the shape of the board.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:46:39 GMT -5
I routered in a handle.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:48:21 GMT -5
Painted on a cheater coat of resin to both sides of the baord; I used Solarez, and it worked out really well.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:49:08 GMT -5
I added 6oz fiberglass cloth to each side of the board.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:58:27 GMT -5
Added a dry hatch to keep my goodies.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 22:59:07 GMT -5
Then I installed my vented leash plug to let hot air out of the board when everything is closed up.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 23:00:24 GMT -5
Routered out a slot for my fin box to go.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 23:01:22 GMT -5
Had to level out the board a lot to add the resin for the fin box.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 23:02:37 GMT -5
After it dried, i sanded down the fin box flush with the board.
|
|
josht
New Member
Posts: 31
|
Post by josht on Sept 22, 2015 23:07:54 GMT -5
This build has been really cool, and I cant wait to get it out on the water!
|
|
josht
New Member
Posts: 31
|
Post by josht on Oct 24, 2015 15:17:59 GMT -5
|
|