|
Post by Peter on Oct 21, 2019 14:29:55 GMT -5
I built a 6.6 hws kite surf board. I tried to surf it and recently with all the wax removed I noticed two dimplesin the balsa deck. The deck has 4oz e glass. Resin research epoxy. I think I need to cut out the balsa area, replace and sand down, ensure I have two layers of glass. The one dimple is 1.5 inches across, the other one is smaller. I considered injecting expanding foam but I'm afraid that it might expand too much aND cracked the fishbone, or pop the deck. Any thoughts for a repair. Thanks, Peter
|
|