tonyd
New Member
Posts: 24
|
Post by tonyd on Mar 19, 2016 7:08:59 GMT -5
Can anyone offer comments on creating a nose that is more pointed. My thought is a steeper cut to start, then nose pieces that are slightly triangular rather than straight.
|
|
tonyd
New Member
Posts: 24
|
Post by tonyd on Apr 24, 2016 13:37:31 GMT -5
I found some large balsa blocks that might allow me to make a longer pointed nose without adding much weight. Since I'm painting the rails anyhow, this may work if I use a bit of Kevlar on the nose to prevent dings.
|
|