|
Post by mpalace81 on Dec 15, 2012 9:57:24 GMT -5
First time poster here! Im just finishing up the shaping on my 8' 10" board and am planning the glassing phase. Can someone help me out with the steps needed to get that glass looking finish. I am also pulling my hair out trying to find the best materials to use. I have used the most inexpensive means through this whole build and want to keep it that way but want good results. Any help would be appreciated.
|
|
|
Post by mpalace81 on Dec 15, 2012 12:17:47 GMT -5
Just found my answer on an older post. If i get in a bind ill be back! Great site!
|
|