|
Post by chesapeakesup on Dec 4, 2016 8:12:45 GMT -5
The plans for the rocker jig say to make a mark every eight inches for a 2 x 4 for each of the ribs. On a 12 foot 2 x 4, that leaves 17 marks, but the instructions say to only cut 12 36" 2 x 4s, one for each rib. In the exploded view, it looks like there are thirteen ribs. Is every eight inches correct?
|
|
tonyd
New Member
Posts: 24
|
Post by tonyd on Dec 20, 2016 18:38:40 GMT -5
Mine has the supports on 8 inch centers... Sounds like you're OK
|
|