|
Post by karuhi on Mar 17, 2013 17:43:08 GMT -5
can someone please tell me how many litres of epoxy i'm going to need to do the complete job (seal/laminate/fill/gloss) on the 9' board i've just built. cheers - justin
|
|
|
Post by vilanobeachsurf on Mar 18, 2013 7:33:41 GMT -5
Kind of depends on what type of glass you have, here is some general info though...
2.5 ounce cloth….1 gallon wets out 25 square yards
4 ounce cloth……1 gallon wets out 15 square yards
6 ounce cloth……1 gallon wets out 10 square yards
10 ounce cloth…..1 gallon wets out 6.5 square yards
For me, with a 9'1" board and 8 oz cloth I used about a gallon from sealing to gloss. Good luck!
|
|
|
Post by kevvisser on May 27, 2015 15:27:40 GMT -5
just glassed a 8ft and 10'6 sup with 6oz cloth.
I wasted a little here and there from mixing up too much but the I used 15lts for the whole job. That's two boards, cheater coat, lamination, fill coat (sand back ) then hot coat.
plus two paddles
hope this helps
|
|